PROFILE PRODUCTS SERVICES
Asbestos Rubber Sheets
Asbestos Rubber Sheet with wire net strengthening
Oil-Resistance Asbestos Rubber Sheets
Acid-Resistance Asbestos Rubber Sheets
Non-Asbestos Jointing Sheets
Asbestos Latex Paper / Sheet
Non-Asbestos Latex Paper / Sheet
Asbestos Rubber Gasket
Industrial Rubber sheet
Cylinder Head Gasket Materials
Asbestos Cloth, Rope,Tape
Braided Packing Series
Ceramic Fibre Products
Glass Fibre Products
Sight Glass
NY150 Oil-Resistance Asbestos Rubber Sheets NY250 Oil-Resistance Asbestos Rubber Sheets
NY300 Oil-Resistance Asbestos Rubber Sheets NY400 Oil-Resistance Asbestos Rubber Sheets
NY510 Oil-Resistance Asbestos Rubber Sheets NY600 Oil-Resistance Asbestos Rubber Sheets
Oil-Resistance Asbestos Rubber Sheets With Steel Wire Inserted
Material:
Made of good long asbestos Fibre, oil-resistance synthetic rubber, heat-resisting packing material compound heating and compression molding it and used as sealing material in the joints of oil pipeline and sealing gasket used on automobiles motorcvcles, agricultural machines, engineering machinery engines
Uses:
Mainly used as the sealing gasket material for the equipment in kerosene, petrochemical, alkali, solvent, fuel oil, petroleum-based lubricating oil and other mediums.
Working pressure: 1.5Mpa , Max working temperature: 150℃
Sizes: 1500 x 1360 x (0.5 – 6.0)mm, 1270 x 1270 x (0.5 – 6.0)mm,1500 x 1500 x (0.5 – 6.0)mm
Packing: in wooden pallet of about 1000 kgs, 2000kgs net each.
                                   Oil-resisting Asbestos Rubber Sheets Physical Property                                                                                                   
                                                                                            GB/T539-2008  
Item
NY510
NY400
NY300
NY250
NY150
HNY300
Tensile strength MPa≥
18.0
15.0
12.7
11.0
9.0
12.7
Compressibility %
7-17
Rebound Rate%≥
50
45
35
50
Creep relaxation rate%≤
45
—
45
Density   g/cm³
1.6 — 2.0
With the temperature
of 149℃,
dipped in IRM903 aviation luricatint
oil for 5h
Horizontal Tensile strength  MPa≥
15.0
12.0
9.0
7.0
5.0
9.0
weight-increasing%≤
30
Surface
change
_
No bubble
With the temperature
21-30℃,
dipped in ASTM B fuel Oil aviation luricatint
oil for 5h
weight-increasing%
0-20
_
0-20
With the homoeothermy,
oil seal Performance
Pressure (MPA)
18
16
15
10
8
15
Seal require
Keep 30 minutes,no leak
Nitrogen leakage rate
[ml/(h.mm)]≤
300

 
 
  Address:1505-1506 Fuyuan Building,Quanyechang,Hengshui,Hebei, China (P.C.053000)
Fax:+86 318 7080093 / 7080094 Tel:+86 318 7906186 / 7080091 / 7080092 / 7080095
E-mail: sales@asbestos-joint.com
Homepage: http://www.asbestos-joint.com